Meridian Nortel 1 Option 11C Mini Installation Manual page 179

Chapter 13 — Installing and connecting the cross-connect terminal
Figure 52
Cable connectors on the back of the Main Chassis
For 1.5 Mbit and 2.0 Mbit DTI/PRI-related wiring and cable information,
refer to the following documents:
• Option 11C 1.5Mbit DTI/PRI Administration and Maintenance Guide
(553-3011-310)
• Option 11C 2.0 Mbit DTI/PRI Administration and Maintenance Guide
(553-3011-315) for
Procedure 22
Connecting the cables
1 Loosen the velcro straps at each connector you plan to use.
2 Connect a 25-pair cable to each of the connectors that will
contain a line or trunk card. Refer to the card slot assignment
plan.
Make sure you tag both ends of each cable with the chassis and
connector numbers. See Figure 52.
Connector
for slot 3
Connector
for slot 2
Connector
for slot 1
Connector for
slot 5 and half
of slot 6
Option 11C Mini
Page 179 of 332
Connector for
slot 4 and half
of slot 6
Planning and Installation Guide