Table of Contents
Advertisement
Chapter 10 — Connecting the Chassis
Expander to the Main Chassis
This chapter describes how to add a Chassis Expander to your Option 11C
Mini system. Use the same methods described in "Chapter 9 — Installing the
chassis" on page 115 to install the Chassis Expander. Refer to "Chapter 4 —
Creating an equipment layout plan and a card slot assignment plan" on
page 69 for measurements and distances between the Main Chassis and the
Chassis Expander.
This chapter contains the following procedure:
•
Procedure 6: "Adding a Chassis Expander" on page 135
The Chassis Expander connects to the Main Chassis by two copper cables:
one provides DS-30X connectivity and the other provides CE-MUX
connectivity to slot 10 only.
Procedure 6
Adding a Chassis Expander
1
Install the Chassis Expander following the procedures in
"Chapter 9 — Installing the chassis" on page 115.
2
Connect one of the NTDK95 cables from the CE-MUX connector
on the back of the Main Chassis to the CE-MUX connector on the
back of the Chassis Expander.
3
Tighten the screws on the connectors.
4
Connect the other NTDK95 cable from the DS-30X connector on
the back of the Main Chassis to the DS-30X connector on the back
of the Chassis Expander.
Option 11C Mini
Planning and Installation Guide
Page 135 of 332
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Nortel Meridian 1 Option 11C Mini and is the answer not in the manual?
Questions and answers