Notice For International Installations - Meridian Nortel 1 Option 11C Mini Installation Manual

Notice for international installations

Before you install any equipment, must make sure that it can connect to the
facilities of the local telecommunications company. You must install the
equipment using an acceptable method of connection. In some cases, a
certified connector assembly (telephone extension cord) can extend the
company's inside wiring associated with a single line individual service.
Understand that compliance with the above conditions does not always
prevent degradation of service.
An authorized Canadian maintenance faciltiy, identified by the supplier, must
make repairs to certified equipment. If you make repairs or modifications to
this equipment (or if the equipment malfunctions), the telephone company
can ask you to disconnect the equipment.
Make sure that the electrical ground connections of the power utility,
telephone lines, and internal metallic water pipe system, if present, connect
together. This precaution is for the users' protection, and is very important in
rural areas.
The Option 11C Mini frame ground of each system chassis must be
tied to a reliable building ground reference.
Contact your local electrical inspection authority or electrician to
make electrical ground connections.
If there is not enough planning or technical information available for your
country of operation, contact your regional distributor or authority for help.
Chapter 5 — Regulatory information
CAUTION
WARNING
Option 11C Mini
Page 85 of 332
Planning and Installation Guide