Page 214 of 332
Feature set and ISM parameters
Security Device
AUX ID
Customer database
553-3021-209
Standard 3.00
Chapter 16 — Starting the Option 11C Mini and installing software
The Software Installation Program allows the selection of a feature set to be
installed and enabled on the Option 11C Mini system. A feature set, such as
Enhanced Business or Networking Services, has an associated list of software
packages and ISM parameters. The Software Delivery Card can include
several preconfigured feature sets.
The Software Installation Program also allows the addition of individual
packages from the feature set and the changing of ISM system parameters.
Additions and changes are keycode controlled; therefore, the packages and
ISM parameters must match those corresponding to the site's keycodes.
Note: The Software Installation Program does not check the
prerequisites and interactions of added packages.
A Security Device comes with each new Option 11C Mini system. Attach this
device to the component side of the NTDK97 MSC card at the time of initial
installation. The Security Device remains there for the life of the system.
Enter the AUX ID using the Software Installation Program. For new Option
11C Mini sites, the AUX ID is the system security ID. When assigned, the
AUX ID remains for the life of the system.
The Software Installation Program allows the installation of a customer
database from one of the following sources:
Preconfigured database
The Software Delivery card can include several preconfigured databases and
their associated feature sets. In addition, a minimal database is provided
which contains basic system configuration information with no customer
data.
Archived database
The Software Installation Program allows the archiving of various databases
which can be used later at Option 11C Mini sites. It allows multiple databases
to be configured off-site and then installed ready-to-use at customer sites.
April 2000
Need help?
Do you have a question about the Nortel Meridian 1 Option 11C Mini and is the answer not in the manual?
Questions and answers