Application Example For Mac Vlan - TP-Link JetStream T1600G-28TS User Manual

Choose the menu VLAN→MAC VLAN→Port Enable to load the following page.
Select your desired port for MAC VLAN function. All the ports are disabled for MAC VLAN function
by default.
Configuration Procedure:
Step Operation
1 Create VLAN.
2 Create MAC VLAN.
3 Select your desired
ports for MAC VLAN
feature.

6.4 Application Example for MAC VLAN

Network Requirements

Switch A and switch B are connected to meeting room A and meeting room B respectively, and

the two rooms are for all departments;
Notebook A and Notebook B, special for meeting room, are of two different departments;

The two departments are in VLAN10 and VLAN20 respectively. The two notebooks can just

access the server of their own departments, that is, Server A and Server B, in the two meeting
rooms;
The MAC address of Notebook A is 00-19-56-8A-4C-71, Notebook B's MAC address is

00-19-56-82-3B-70.
Figure 6-8 Enable Port for MAC VLAN
Description
Required. On the VLAN→802.1Q VLAN→VLAN Config page,
click the Create button to create a VLAN. Enter the VLAN ID and
the description for the VLAN. Meanwhile, specify its member ports
and the link type of the ports.
Required. On the VLAN→MAC VLAN page, create the MAC VLAN.
For the device in a MAC VLAN, it's required to set its connected
port of switch to be a member of this VLAN so as to ensure the
normal communication.
Required. On the VLAN→MAC VLAN→Port Enable page, select
and enable the desired ports for MAC VLAN feature.
77