Touch Panel Adj - Konica Minolta bizhub C350 Service Manual

bizhub C350 Field Service Ver2.0 Sep. 2004
4.2

Touch Panel Adj.

Functions • To adjust the position of the Touch Panel display
Use • Make this adjustment if the Touch Panel is slow to respond to a pressing action.
• Use during the setup procedure.
Adjustment 1. Call the Tech. Rep. Mode to the screen.
2. Press the keys: Stop → 0 → Stop → 3
Procedure
3. Using the tip of a pen or similar object, touch the four crosses (+) on the screen in
sequence.
• These crosses may be touched in any order; but be sure to touch the center of each
cross.
• Use care not to damage the screen surface with the tip of the pen.
4. The cross touched changes into a grid marker that consists of a square with a cross
superimposed.
5. Touch [END].
TECH. REP. MODE
4036fs3015e0
4036fs3016e0
3-41