Changing Security Settings - Kyocera 3508ci Operation Manual

Installing and Setting up the Machine > Embedded Web Server RX

Changing Security Settings

1
2
Display the screen.
1
Launch your Web browser.
2
In the address or location bar, enter the machine's IP address or the host name.
Click in the following order to check the machine's IP address and the host name.
[Device Information] in the home screen > [Identification/Wired Network]
3
Log in with administrator privileges.
The factory default setting for the default user with administrator privileges is shown below.
(Upper case and lower case letters are distinguished (case sensitive).)
Login User Name: Admin
Login Password: xxxxxxxxxx (Serial Number)
Checking the Equipment's Serial Number (page 1-i)
4
Click [Security Settings].
Configure the Security Settings.
From the [Security Settings] menu, select the setting you want to configure.
NOTE
For details on settings related to certificates, refer to the following:
Embedded Web Server RX User Guide
2-61