Adjustment/Maintenance - Kyocera TASKalfa 352ci Operation Manual

Setup and Registration (System Menu) > System Menu

Adjustment/Maintenance

[System Menu/Counter] key > [Adjustment/Maintenance]
Adjust printing quality and conduct machine maintenance.
Item
Quiet Mode Settings
Quiet Mode
Specify for Each Job
Density Adjustment
Copy
Send/Box
Sharpness Adjustment
Copy
Send/Box
Contrast
Copy
Send/Box
Background Density Adj.
Copy (Auto)
Send/Box (Auto)
Toner Save Level (EcoPrint)
Copy
Printer
Auto Color Correction
Lower print and scan speed for quiet processing.
Set the Quiet Mode. Select this mode when the running noise is uncomfortable.
Value: Off, On
It is possible to set the use of Quiet Mode for each job, such as copying and sending. Set
whether or not to permit the setting for each job.
Value: Permit, Prohibit
Adjust density.
Adjust copy density.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Adjust scan density when sending or storing the data in Document Box.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Adjust the sharpness of the image outline.
Sharpen or blur overall image outlines during copying. Adjustment can be made in 7 levels.
Value: -3 (Blur), -2, -1, 0, +1, +2, +3 (Sharpen)
Sharpen or blur overall image outlines when sending or storing them in the Document Box.
Adjustment can be made in 7 levels.
Value: -3 (Blur), -2, -1, 0, +1, +2, +3 (Sharpen)
You can increase or decrease the overall contrast.
Increases or decreases the overall contrast of copies.
Value: -3 (Lower), -2, -1, 0 (Normal), +1, +2, +3 (Higher)
Increases or decreases the overall contrast when documents are sent or saved in a document
box.
Value: -3 (Lower), -2, -1, 0 (Normal), +1, +2, +3 (Higher)
Darkens or lightens overall background density adjustment.
Darkens or lightens overall background density adjustment during copying.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Darkens or lightens overall background density when sending images or storing them in the
Document Box.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Select the default Toner Save Level (EcoPrint).
Select the default Toner Save Level (EcoPrint) at the time of copying.
Value: 1 to 5
Raising the level reduces toner consumption, but image quality falls.
Select the default Toner Save Level (EcoPrint) at the time of use of the printer.
Value: 1 to 5
Raising the level reduces toner consumption, but image quality falls.
This setting allows you to adjust the detection level used by the machine to determine whether
the original is color or black and white during Auto Color Mode. Setting a lower value will result
in more originals being identified as color, while a larger value will tend to increase the number
of originals being identified as black and white.
Value: 1 (Color), 2, 3, 4, 5 (B & W)
8-49
Description