File Name Entry; Priority Override; Quiet Mode - Kyocera TASKalfa 352ci Operation Manual

Using Various Functions > Functions

File Name Entry

Print from Print from
Copy
Box USB
Adds a file name.
Additional information such as job number and date and time can also be set. You can check a job history or job status
using the file name, date and time, or job number specified here.
Enter the file name (
up to 32 characters)
To add date and time, select [Date and Time]. To add job number, select [Job No.]. To add both, select [[Job No.] &
[Date and Time]] or [[Date and Time] & [Job No.]].

Priority Override

Print from Print from
Copy
Box USB
Suspends the current job and gives a new job top priority.
The suspended job resumes after the other job is finished.
(Value: [Off] / [On])
NOTE
• This function is not available if current job was an override.
• Priority override may not be available depending on the status of the current print job and memory usage.

Quiet Mode

Print from Print from
Copy
Box USB
Lower print and scan speed for quiet processing.
Select this mode when the running noise is uncomfortable.
It is possible to set the use of Quiet Mode for each function, such as copying and sending.
(Value: [Off] / [On])
NOTE
• The processing speed will be slower than normal when in Quiet Mode.
• This cannot be used when [Prohibit] is set for "Specify for Each Job".
Specify for Each Job (page 8-49)
Send from Scan to
Send
Box Box
, and select [Next].
Scan to
Scan to
Send
USB
Box
Scan to
USB
6-27