Table of Contents
Advertisement
Safety instructions
Warning labels
1.3
Handling of warning label, pasting location and types are explained.
Warning label is used on parts of the printer which especially need caution. Understand the locations
and the descriptions of the danger associated with each label before operating the printer.
1.3.1
Handling the operation procedure labels
When handling the warning labels, be careful about the following points.
NOTE
• Check whether all the warning labels can be read. If the letters or illustrations on the label are not
clear, remove the dirt from the label.
• Use cloth, water and neutral detergent for removing dirt from the warning label. Avoid either
organic solvents or gasoline.
• It is necessary to replace the labels if they are damaged, lost or illegible.
If the warning labels have to be replaced, contact MUTOH local dealer.
1.3.2
Locations and types of warning labels
Pasting locations of the warning label is shown in the following figure.
No.
1
Types of warning label
1-6
RJ-900X series OPERATION MANUAL
1
Advertisement
Table of Contents
Troubleshooting
