Warning Labels; Handling The Operation Procedure Labels; Locations And Types Of Warning Labels - MUTOH ValueJet VJ-1204 Operation Instructions Manual

1.3 WARNING LABELS

In this section, the handling, location and types of warning labels are explained.
A warning label is used on parts of the printer which especially need caution. Understand the locations and
the descriptions of the danger associated with each label before operating the printer.

1.3.1 Handling the operation procedure labels

Notes
Check whether all the warning labels can be read. If the letters or illustrations on the label are not clear,
•
remove the dirt from the label.
Use cloth, water and neutral detergent for removing dirt from a warning label. Avoid using either organic
•
solvents or gasoline.
It is necessary to replace the labels if they are damaged, lost or illegible.
•
If the warning labels have to be replaced, contact your local MUTOH dealer.

1.3.2 Locations and types of warning labels

Locations of the warning labels are shown in the following figures.
4
2 1
5
10
Operation Instructions VJ-1204
3
6
AP-77170, Rev. 2.0, 2/04/2007