Installation Assumption - NEC EXPRESS 5800 User Manual

C-2 Installing and Configuring Windows 2000 and Windows NT 4.0

Installation Assumption

The installation and configuration instructions in this appendix assume the following:
You have properly completed the hardware installation.
!
You have run the BIOS Setup Utility to check system configuration.
!
IMPORTANT:
must be enabled in your system BIOS.
You will be installing Windows
!
CD-ROM media.
IMPORTANT:
your system, it was preconfigured at the factory. Refer to your system's User's
Guide and to the RAID Installation Guide and the Disk Array Controller
Installation Guide and User's Manual for additional information on this option
card. If you need to change the RAID level from the factory setting, you must
change the setting before installing the operating system.
To successfully install Windows 2000 on your system, PnP
®
2000 Operating System from the
If you have the optional disk array controller preinstalled on