NEC EXPRESS 5800 User Manual page 180

4-52 Installing the Operating System
24. This concludes the installation of SCO OpenServer 5.0.X. You need to open the
diskette drive and reboot the SCO OpenServer 5.0.X operating system from the
system drive you just installed.
This concludes the installation of SCO OpenServer 5.0.X. You need to open the
diskette drive and reboot the SCO OpenServer 5.0.X operating system from the
system drive you just installed.
Note:
when booting SCO a warning message may appear as follows:
WARNING: Cannot connect to APM, error 0x0036 System loaded,
press <Return> to start:
To prevent the WARNING message from appearing, boot the
system to single-user Mode. Edit the /etc/default/boot file. Add
"apm.check=no" to the end of the line indicated by the
"DEFBOOTSTR=" entry.
It is recommended that any additional software packages be installed at this time.
During the installation of SCO or any time thereafter