Installing Lan Adapter Drivers - NEC EXPRESS 5800 User Manual

C-8 Installing and Configuring Windows 2000 and Windows NT 4.0
After installing Windows NT, logon to the system using the administrator account or other
9.
account, which is a member of the Administrators group.
Insert the EXPRESSBUILDER CD and run the Windows NT 4.0 NEC Update Module.
10.
IMPORTANT: If you change the configuration of the system (by adding or
removing hardware or operating system software components), or repair the
system, you must run the system update again.

Installing LAN Adapter Drivers

The following section includes special driver installation instructions for LAN adapters used in your
system.
Driver Installation for the Intel PRO/100+ LAN Adapter
The PRO/100+ driver will be installed during the installation of Windows NT, see "Installing Microsoft
®
Windows NT 4.0 Operating System" earlier in this appendix.
Use the following procedure to install the LAN adapter driver on your server:
During the Windows NT installation when the dialog box displaying the message "To have
1.
setup search for a Network Adapter, click Start Search button" opens. Click "Select from List".
In the "Select Network Adapter" dialog box 1, Click "Have Disk". The "Insert Disk" dialog
2.
box opens.
Insert the floppy disk named "Windows NT 4.0 OEM-DISK #2" into the floppy disk drive.
3.
Enter "A:\I550PM" and click on [OK].
4.
The "Select OEM Option" dialog box opens.
5.
Select "Intel(R) PRO Adapter" and click on [OK].
Click on [NEXT].
6.
You may need to specify network information depending on the protocol you use. Follow the
7.
message on the screen to continue the Windows NT installation.