NEC EXPRESS 5800 User Manual page 24

1-10 System Overview
STATUS lamp
Description
indication
On (green) The server is operating normally.
Flashing The server is operating with the
(green) memory or CPU in degraded
state.
A 1-bit memory error occurs
frequently.
Off Power is off.
POST is in progress.
CPU error occurred.
CPU temperature alarm was
detected. (Thermal-Trip)
A timeout occurred when the time
set for the watchdog timer was
reached.
An uncorrectable memory error was
detected.
PCI system error occurred.
PCI parity error occurred.
CPU bus error occurred.
A memory dump request was
issued.
On (amber) A temperature alarm was detected.
A voltage alarm was detected.
All the power supply units failed.
Flashing A fan alarm was detected.
(amber)
A temperature warning was
detected.
Action
–
Identify the device in degraded state
by using the BIOS setup utility
"SETUP," and replace it as soon as
possible.
–
Wait while POST is checking the
system. The STATUS lamp turns
green when POST is completed.
Turn the power off and on. If the
POST screen displays an error
message, record the message, and
contact your service representative.
Wait until the memory dump is
completed.
Check if the internal fans are clean
and if the fan units are firmly
connected.
If the STATUS lamp indication does
not change when the fans are
operating correctly, contact your
service representative.
Contact your service representative.
Check if the fan units are firmly
connected.
If the STATUS lamp indication does
not change when the fans are
operating correctly, contact your
service representative.
Check if the internal fans are clean
and if the fan units are firmly
connected.
If the STATUS lamp indication does
not change when the fans are
operating correctly, contact your
service representative.