NEC EXPRESS 5800 User Manual page 131

Express Setup requires a "Configuration Diskette". The Configuration Diskette is a floppy disk
that includes the configuration information for the server to be automatically installed. Express
Setup will perform the entire process of the setup using the information in the floppy disk.
During this procedure, you do not have to be in front of the Express server to confirm the state of
the setup. Also, using the same Configuration Diskette used before allows you to re-setup your
server with the same condition as before.
Express Setup includes two types of installation method.
Quick start
!
Quick start uses a Configuration Diskette with configuration parameters for the server,
which were pre-specified before starting the Express Setup. Configuration parameters
can be pre-specified by using Express Setup for Windows (see EXPRESSBUILDER
User's Guide on the EXPRESSBUILDER CD).
Normal start
!
Normal start creates the Configuration Diskette during Express Setup.
NOTES:
To perform Express Setup, BIOS Setup must prioritize the CD-ROM
!
drive before the diskette drive and hard drive.
You can create Configuration Diskette in advance using "Express
!
Setup for Windows" included in EXPRESSBUILDER.
By creating the Configuration Diskette in advance, you can minimize
!
the number of items that is necessary to input or select during
Express Setup. (You can also create or modify the setup information
stored on a Configuration Diskette during Express Setup.) If you
have a computer other than Express5800 server that is running with
Windows 95/98, Windows NT 3.51 or later, or Windows 2000, we
recommend you to edit setup information from the computer in
advance using Express Setup for Windows.
For more information on how to create Configuration Diskette using
Express Setup for Windows, see EXPRESSBUILDER User's Guide on
the EXPRESSBUILDER CD.
Installing the Operating System 4-3