Scsi Bios ~ Scsiselect; Using Scsiselect Utility; Configuring Scsi Controller On System Board - NEC EXPRESS 5800 User Manual

SCSI BIOS ~ SCSISelect ~

The SCSISelect utility is provided to configure the SCSI controller on the system board (or the
SCSI controller on an optional board). This utility may be started with a simple key operation
while POST is in progress and requires no specific start-up disk.

Using SCSISelect Utility

Use the SCSISelect utility mainly to set the transfer speed of connected SCSI devices. The SCSI
devices include those installed in the 5.25-inch device bays and backup devices, such as an
external DAT and MO, but not hard disks.
IMPORTANT:
basis with a utility. The server contains one SCSI controller.
When you added optional SCSI controllers, you need to make
configuration for each SCSI controller in addition to the standard internal
SCSI controller. Some additional SCSI controllers may require a different
utility to make changes to the configuration.

Configuring SCSI Controller on System Board

The following describes configuration for the SCSI controller on the system board of the server.
IMPORTANT:
utility. Dialog boxes appear on your SETUP utility, thus, may differ from
descriptions in this User's Guide. If you find anything unclear, see the
online help or ask your sales representative.
SCSI configuration must be made on a per-SCSI controller
The server contains the latest version of the SCSISelect
Configuring Your System 3-31