NEC EXPRESS 5800 User Manual page 156

4-28 Installing the Operating System
When prompted, remove the EXPRESSSBUILDER CD from the CD-ROM drive, and
9.
insert Windows NT CD into the CD-ROM drive.
The [Software License Agreement] screen appears.
Read the contents carefully and click [I agree.] if you do agree. If you do not agree,
10.
click [I disagree.].
IMPORTANT: If you do not agree to this agreement, the setup
terminates and Windows NT 4.0 will not be installed.
When prompted, remove the Configuration Diskette from the floppy disk drive and
11.
Windows NT CD from the CD-ROM drive.
If you have specified to apply Service Pack 5 or later, insert the specified version of
12.
Service Pack into CD-ROM drive, when prompted.
Windows NT 4.0 is installed automatically, and the local administrator is automatically
logged on to the system.
NOTE: If Backup Domain Controller was specified, the system does
not logon the administrator automatically.
Install and configure the device drivers as described in the following section.
Express Setup has completed.