NEC EXPRESS 5800 User Manual page 195

System bar
CURSOR: Select Window ENTER: View Window
Test window
Target scope
Screen showing diagnostic result
System bar: Shows information including time of progress during the diagnosis and
descriptions on key operations to navigate the window upon completion of
the diagnosis.
Title bar: Shows the diagnostic items. If an error is detected, the bar is indicated in red
(local console), or flashing (remote console).
Test window:
Target scope:
to move it to another test window. (Move the target scope to a desired
window and press Enter. Now you can view detailed information on the
selected window. To return to the previous window, press Enter once
again.)
IMPORTANT:
shown below.
PageUp: Ctrl + A, PageDown: Ctrl + Z
If an error is detected during the system diagnosis, an error information is displayed as
follows. Take a note on the error message and contact your sales agent.
Local console: The title bar turns in red, and error information is displayed in red
Remote console: The test item indicated on the title bar flashes.
Press Q and select "Reboot" from the menu.
7.
The server restarts and the system is launched from the EXPRESSBUILDER.
Exit the EXPRESSBUILDER, and remove the CD-ROM from the CD-ROM drive.
8.
Turn off the server and unplug the power cord from the receptacle.
9.
Reconnect all the LAN cables to the server.
10.
Plug the power cord.
11.
This completes the system diagnosis.
Title bar
P: Log Out Q: Quit
(Local console)
Shows the progress or result of diagnosis.
Cursor to select the test window. Use the cursor keys on the keyboard
To select the test window in remote console, press keys as
characters.
System bar
Title bar
Test window
Target scope
(The four corner blocks
are reversed in white)
Screen showing diagnostic result
(Remote console)
Maintenance 5-9