NEC EXPRESS 5800 User Manual page 145

IMPORTANT:
Specify "Kernel Memory Dump" under "Write debugging
!
Information."
Specify a drive where there is a free area greater than the size of "the
!
memory installed on the Express server + 12MB".
If the installed memory is increased, the size of the debug
!
information (memory dump) to be collected must be increased. If the
installed memory size is larger than 2GB, the maximum size of the
dump file is 2048MB. The required amount of free space would be
"2048MB+12MB".
Click [Performance Options].
6.
Click [Change] on the [Virtual Memory] dialog box.
7.
Modify [Initial Size] in the [Paging File Size for Selected Drive] box to a value larger
8.
than "[Recommended Size]", and click [Specify].
IMPORTANT:
The above paging file size is necessary for collecting debug
!
information (memory dump). If you set the initial value of paging
file size smaller than the 'recommended' value, you may not be able
to collect complete debug information (memory dump).
For more information on "Recommended" value, see "Specifying
!
Partition Size" described earlier.
In anticipation of problems occurring it is recommended that a dump
!
file always be prepared in advance.
In case the memory is increased, re-specify the paging file size to suit
!
the new memory size.
Click [OK].
9.
A message to restart the system may appear. If so, accept the prompt and restart the
system.
Installing the Operating System 4-17