1-32 System Overview
POWER Switch
Use the POWER switch to turn the server on and off.
Power On
Press the POWER switch on the front of the computer chassis.
The POWER/SLEEP lamp lights green in color.
POWER/SLEEP lamp
IMPORTANT:
If the power cord is connected to a power control device such as a UPS
!
(Uninterruptable Power Supply), make sure that the power control
device is powered.
If the power cord is connected to the server, an initial diagnosis of the
!
hardware starts. The POWER switch does not work while in diagnosis
mode. Wait for about 10 seconds, then press the POWER switch.
Do not turn off the server until characters following the "NEC" logo
!
appear on the screen.
POWER switch