NEC EXPRESS 5800 User Manual page 150

4-22 Installing the Operating System
Windows NT 4.0 /Windows NT 4.0 EE
You can fully install Windows NT Server 4.0 (Windows NT 4.0) and Windows NT 4.0
Enterprise Edition (Windows NT 4.0 EE) using Express Setup. However, note the following
issue:
IMPORTANT:
Before starting the installation, complete the addition of optional
!
boards and settings of required BIOS values.
Use this User' Guide when installing Windows NT 4.0 on this server
!
system. Do not use the installation guide for installing Windows NT
4.0 that may be packaged with other software not supplied with this
system.
Service Pack
!
Express Setup can apply "Service Pack 5" or later on the system.
If you want to apply Service Pack older than Version 5, select [Do
not Apply] in [Apply Service Pack] item when creating the Setup
File to setup the system, and perform the "System Update" described
later.
After completing Express Setup, see "Setup for Problem Resolution"
!
described later to configure your system to facilitate problem
resolution and recovery
If more than one network adapter is connected, specify the IP address
!
for each adapter after starting OS.
Magnetic Optical (MO) Device
If you specify the file system as NTFS with a MO Device connected during the installation; the
file system will not be converted normally. In this case, Disconnect MO Device and restart the
installation from the beginning.