Collect Configuration Information; Windows 2000; Windows Nt 4.0 - NEC EXPRESS 5800 User Manual

6-30 Troubleshooting

COLLECT CONFIGURATION INFORMATION

This section describes on how to collect the information on hardware configuration and inside
specification.
In order to collect information, "Diagnostic Program" is used.
IMPORTANT:
procedure below after restarting the system.

Windows 2000

Point to [Settings] in Start menu, and click [Control Panel].
1.
The [Control Panel] dialog box appears.
Double-click [Management Tool], and double-click [Computer Management].
2.
The [Computer Management] dialog box appears.
Click [System Tool]
3.
Click [Save as System Information File] in the [Operation] menu.
4.
Input the file name to save in the [File Name] box.
5.
Click [Save].
6.

Windows NT 4.0

Click [Program]
1.
pop-up menu.
Click [Save the Report] in the [File] menu.
2.
Specify the details of the report you want to create.
3.
Specify [Range] as [All Tabs].
Specify [Detailed Level] as [Perfect].
Specify [Output Location] as [File].
Input the file name to save in the [File Name] box.
4.
Click [OK].
5.
If STOP error, system error, or stall occurred, follow the
[System Information].
[Management Tool] [Windows Diagnostic Tool] from the Start