Windows; Device Drivers; Windows Nt 4.0 - NEC EXPRESS 5800 User Manual

C-6 Installing and Configuring Windows 2000 and Windows NT 4.0

Windows NT 4.0

This appendix contains supplemental instructions needed to install and configure hardware and
software used with the Microsoft Operating System Windows NT Release 4.0. This information is
intended to supplement the more detailed procedural documents available from Microsoft. This
information is not intended to be the central source of installation and configuration information for
your system. Read this entire appendix along with Microsoft's Windows NT 4.0 installation procedures
before starting the installation process.
IMPORTANT: Read the System Release Notes for the latest system
information before attempting to install Windows NT 4.0 Operating System on
your system.

Device Drivers

The drivers required for the devices listed in the table below are located on the EXPRESSBUILDER
CD. To create the required diskettes, select "Tools" on the EXPRESSBUILDER CD. This table lists the
required diskette labels.
IMPORTANT:
EXPRESSBUILDER CD make sure you use the drivers required for the
devices on your specific system.
Always read the information in the release notes or inserts, included with any
options for they supersede the information in this guide.
Device
SCSI or SCSI RAID Controller
Network Controller
System Board
Video
*Diskette generated from the NEC EXPRESSBUILDER CDROM
**Run this application from the EXPRESSBUILDER CDROM; diskette not required
When creating the required diskettes from the
Required Driver Media*
Windows NT 4.0 OEM - Disk #1*
Windows NT 4.0 OEM - Disk #2*
Windows NT 4.0 NEC Update Module**
RAGE XL Driver for Windows NT 4.0**