NEC EXPRESS 5800 User Manual page 218

6-22 Troubleshooting
<The Default Value for Windows NT 4.0>
The specification of network
Adapter :
Protocol :
Service :
Application :
[Complete] does not appear on [Role of Computer] screen.
The [Complete] does not appear if the setup information file that has already been created
!
is loaded.
[Complete] appears only when you first entered the [Role of Computer] screen.
!
Once you go to the next screen from [Role of Computer], the [Complete] will not appear
even if you enter [Back] to go back to the [Role of Computer] screen.
Select [Use Existing Array] at [New/Existing RAID Configuration], but the OS is installed in the whole area of
the disk.
Is there any other partition than the partition to re-use (excluding maintenance area)? If
!
the partition other than the one to re-use does not exist, the setup will reserve the whole
area of the disk to install Windows 2000 or Windows NT 4.0.
<For Windows 2000>
Specified to join the Domain, but the system is installed as Workgroup.
When the setup fails to join the Domain during the installation, it will install the system
!
as Workgroup. Open [System] in Control Panel to specify joining the Domain.
Specified large value as partition size, but when Windows 2000 is actually started, the system partition is
created by 2000MB.
Is the [Partition Size] specified by the value larger than the real area? If you want to
!
create one partition in all area of the hard disk(excluding the maintenance area) to install
the OS, specify [All Area].
Standard network adapter
TCP/IP[DHCP specified]
SNMP, IIS(Excluding Workstation)
ESMPRO Agent
Express Report Service
GAM Server (When connecting Mylex DAC)
GAM Client (When connecting Mylex DAC)
* DAC: Disk Array Controller