Installing Linux - Fujitsu Primergy BX620 S4 User Manual

Chapter 4 Manual OS Installation
4. When the "InstallShieled(R) wizard has completed" message appears, eject the
PRIMERGY Startup Disc from the CD/DVD drive and click [Finish] to restart the
system.
10
Install the display driver.
1. Insert the PRIMERGY Startup Disc into the drive of the server.
When the ServerStart window appears, exit ServerStart.
2. Execute the following command on the PRIMERGY Startup Disc.
[CD/DVD drive]: \DRIVERS\VIDEO\ES1000\Setup.exe
The installation wizard starts up.
3. Click [Next]. Follow instructions in the window to perform installation.
When the installation is completed, the completion window appears.
4. Eject the PRIMERGY Startup Disc from the CD/DVD drive, click [Finish], and
restart the system.
11
Install the LAN driver.
Use the PRIMERGY Startup Disc to install the LAN driver. For more details, refer to "4.3
Installing the LAN Driver" ( p.75).
12
Install the fibre channel driver.
When the Fibre Channel Expansion Board has been installed, use the driver disk created from the
PRIMERGY Startup Disc to install the fibre channel driver after Windows Server 2003
installation was completed. For more details, refer to "4.4.2 Windows Server 2003" ( p.83).
13
Install high reliability tools.
To ensure stable server operation, refer to "Chapter 6 High Reliability Tools" ( p.127) and install
high reliability tools.
The installation of Windows Server 2003 x64 is completed.
14
Set an administrator account for the RAID management tool (ServerView
RAID).
For the setting procedure, refer to the "Integrated Mirroring SAS User's Guide" in the Array
Controller Document & Tool CD.
The installation of Windows Server 2003 has completed.
●
Before starting operation
After OS installation, refer to "Chapter 5 Operations after OS Installation" ( p.85) and perform
necessary operations.

4.2.3 Installing Linux

For the use of Linux, refer to the Fujitsu PRIMERGY website (http://primergy.fujitsu.com).
74