Advanced Menu - Fujitsu Primergy RX300 S4 User Manual

Chapter 7 Configuring Hardware and Utilities

7.2.5 Advanced Menu

The [Advanced] menu sets the peripheral device and PCI device options.
Main Advanced
Setting items on this menu to incorrect values
may cause your system to malfunction.
Peripheral Configuration
>
> PCI Configuration
Advanced System Configuration
>
> Power On/Off
>
IPMI
Reset Configuration Data:
Multiprocessor Specification:
Item
Peripheral Configuration
PCI Configuration
Advanced System
Configuration
Power On/Off
IPMI
Reset Configuration Data
Multiprocessor
Specification
190
PhoenixBIOS Setup Utility
Security Server
Setup Warning
[No]
[1.4]
-/+ Change Values
Select Item
Select Menu
Enter Select > Sub-Menu
table: Items on the Advanced Menu
Setting
Configures the serial port, parallel port, etc.
"7.2.6 Peripheral Configuration Submenu" (p.191)
Configures the PCI device.
"7.2.7 PCI Configuration Submenu" (p.193)
Configures additional settings.
"7.2.8 Advanced System Configuration Submenu" (p.194)
Configures the power on/off settings.
"7.2.9 Power On/Off Submenu" (p.196)
Configures the integrated Remote Management Controller (iRMC) settings.
"7.2.10 IPMI Submenu" (p.197)
• Yes
• No (Initial value)
1.4 (Unchangeable)
Exit
Item Specific Help
Description
Configures the initialization of the Extended
System Configuration Data (ESCD) that retains
system resources.
Sets the version of the used multiprocessor table.
The multiprocessor table is required when a
multiprocessor OS detects the multiprocessor
characteristics of the system.