Example Of Serial Bus Configuration - NEC PD750004 User Manual

µPD750008 USER'S MANUAL
(12) SBI mode
This section describes an example of application which performs serial data communication in the SBI
mode. In the example, the µPD750008 can be used as either the master CPU or a slave CPU on the
serial bus.
The master can be switched to another CPU with a command.
(a) Serial bus configuration
In the serial bus configuration used for the example of this section, a µPD750008 is connected to the
bus line as a device on the serial bus.
Two pins on the µPD750008 are used: serial data bus SB0 (or SB1) and serial clock SCK (P01).
Figure 5-71 shows an example of the serial bus configuration.
174
Figure 5-71. Example of Serial Bus Configuration
Master CPU
µPD750008
SB0, SB1
SCK
V
DD
Slave CPU
µPD750008
SB0, SB1
SCK
Slave CPU
SB0, SB1
SCK
Slave IC
SB0, SB1
SCK
Address 1
Address 2
Address N