Browse Address Table - D-Link DES-3225G Series User Manual

24-port NWay Ethernet Switch User's Guide
♦ RX Octets The number of good bytes received. This also includes local and dropped packets.
♦ Total RX The number of bytes received, good and bad.
♦ Unicast RX/Unicast TX The number of good unicast frames received and sent. This includes dropped
unicast packets.
♦ Multicast RX/Multicast TX The number of good multicast frames received and sent. This includes
local and dropped multicast packets.
♦ Broadcast RX/Broadcast TX The number of good broadcast frames received and sent. This includes
dropped broadcast packets.

Browse Address Table

The Browse Address Table allows the user to view which Switch port(s) a specific network device uses to
communicate on the network. You can sort this table by MAC address, port, or VLAN. This is useful for
viewing which ports one device is using, or which devices are using one port.
To display the Browse Address Table, choose Network Monitoring from the main menu and then choose
Browse Address Table. The following screen appears:
To browse by MAC address, select MAC address in the Search by field, enter the desired MAC address in the
next field, and then press FIND.
To browse by port number, select Port in the Search by field, enter the desired port in the next field, and then
press FIND.
Using the Console Interface
Figure 6-59. Browse Address Table
97