Browse Session Table; Igmp Snooping Group - D-Link DGS-3200-16 - Switch - Stackable User Manual

xStack

Browse Session Table

Users can display the management sessions since the Switch was last rebooted.
To view the following window, click Monitoring > Browse Session Table:

IGMP Snooping Group

Users can view the Switch's IGMP Snooping Group Table. IGMP Snooping allows the Switch to read the Multicast Group IP
address and the corresponding MAC address from IGMP packets that pass through the Switch.
To view the following window, click Monitoring > IGMP Snooping Group:
The user may search the IGMP Snooping Group Table by either VLAN Name or VID List by entering it in the top left hand corner
and clicking Find.
The following fields and settings can be viewed:
Parameter
VID List/VLAN
Name
VID/VLAN Name
IP Address
Delete
Delete All
NOTE: To configure IGMP snooping for the Switch, go to the L2 Features folder and
select IGMP Snooping > IGMP Snooping Settings.
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 7 - 28. Browse Session Table window
Figure 7 - 29. IGMP Snooping Group window
Description
The VID List or VLAN Name of the multicast group.
The VID or VLAN Name of the multicast group.
Enter the IP address.
Click this button to delete the designated IGMP snooping groups learned by the Data Driven
feature.
Click this button to delete all the IGMP snooping groups learned by the Data Driven feature.
205