Introduction; Screen Layout - Dukane VWA-4300 User Manual

Introduction

This section of the manual will orient the operator to the
touch screen features and to its basic operation.

Screen Layout

At the top of the touch screen, messages about the welder
operation appear in the Banner position. See the figure
below.
See Page 90 for a listing of possible messages.
Primary buttons are large and are grouped in one of two
areas – at the top of the screen in the "Header" or at the
left side of the screen in the "Tool Bar" as shown in the
figure below.
Tool Bar
Primary Button Location
Figure 6 -1
Dukane Manual Part No. 403-592-00
A touch screen button is activated with
the gentle, firm touch of a finger. When
active, the touch cell changes color - in
most cases this means from a lighter
shade to a darker shade of color. Some
buttons have an added indicator: a virtual
LED that becomes green when activated
and turns red when deactivated.
Header
Section 6 - Touch Screen Menus
NOTE
Page 41