Table Load Position - Dukane VWA-4300 User Manual

Linear Vibration Welder 4000 Series, Model VWA User's Manual
Frequency – Welding frequency is the rate of vibrational
movement done at the resonant frequency of the system to
Table Load Position – maximize energy transfer.
will use to load parts. The table height is programmable
between 20mm and 500mm. (.784 and 19.68 inches)
See the figure below.
To set the Table Load Position:
1. Touch the Table Load Position entry box.
2. The pop-up window shown in the figure below appears.
3. Follow the instructions in the pop-up window, and set
.
the load position
Figure 6-25 Setup Mode - Table Load Position
Page 64
The table height an operator
NOTE
Using a table cart is a quick and safe
way of installing and removing tooling
from the lift table.
Dukane Manual Part No. 403-592-00