Linear Vibration Welder 4000 Series, Model VWA User's Manual
Activate Hydraulic Pump
To turn on the hydraulic pump, press the green
HYDRAULIC PUMP ON push button. It will light
when the pump is activated. If the pump is rotating in
the proper direction, then the pressure feedback should
read between 150 - 190 psi.
See Figure 7-4.
Initiate HOME Procedure
Press the Machine Reset button on the display toolbar.
See Figure 7-5. The Machine Reset button is active
only in the Setup mode.
Follow the on-screen instructions when those appear.
Page 96
Utilities > PLC I/O Setup: Analog Inputs
Figure 7- 4
Pressure Feedback
Press Machine Reset
to home the machine.
Homing the Machine
Figure 7- 5
Dukane Manual Part No. 403-592-00