Set Table Slowdown - Dukane VWA-4300 User Manual

Set Table Slowdown

Press the Set Table Slowdown button to set the table
position from which the speed of upward table movement
is slowed. See the pop-up window that appears in Figure
6-23 below.
1. Place a set of unwelded parts in the tool.
2. Close the tool manually.
3. Press the Set Table Slowdown button to set.
Touch this button
when the table
has reached the
desired position.
This will be the
new slowdown
position.
Figure 6-23 Setup Mode - Set Table Slowdown Position
Dukane Manual Part No. 403-592-00
Continued from Previous Page
Section 6 - Touch Screen Menus
Touch Table Up and
Table Down buttons
continuously until
desired position is
reached.
Page 61