Sensor Valve 4A Extended; Sensor Valve 4B Retracted - Dukane VWA-4300 User Manual

Linear vibration welder 4000 series
Table of Contents

Advertisement

ALARMS

Sensor Valve 4A Extended

Sensor Valve 4B Retracted

Sensor Valve 5A Extended
Sensor Valve 5B Retracted
Sensor Valve 6A Extended
Sensor Valve 6B Retracted
Alarms and Messages (Page 5 of 6)
Table 6-II
Dukane Manual Part No. 403-592-00
MESSAGE
[Valve 4A] has been triggered, but sensor was not acknowledged.
Solutions:
Check that actuated device is not obstructed.
Check the air pressure setting on the valve.
Check sensor position; make adjustment if necessary.
[Valve 4B] has been triggered, but sensor was not acknowledged.
Solutions:
Check that actuated device is not obstructed.
Check the air pressure setting on the valve.
Check sensor position; make adjustment if necessary.
[Valve 5A] has been triggered, but sensor was not acknowledged.
Solutions:
Check that actuated device is not obstructed.
Check the air pressure setting on the valve.
Check sensor position; make adjustment if necessary.
[Valve 5B] has been triggered, but sensor was not acknowledged.
Solutions:
Check that actuated device is not obstructed.
Check the air pressure setting on the valve.
Check sensor position; make adjustment if necessary.
[Valve 6A] has been triggered, but sensor was not acknowledged.
Solutions:
Check that actuated device is not obstructed.
Check the air pressure setting on the valve.
Check sensor position; make adjustment if necessary.
[Valve 6B] has been triggered, but sensor was not acknowledged.
Solutions:
Check that actuated device is not obstructed.
Check the air pressure setting on the valve.
Check sensor position; make adjustment if necessary.
Section 6 - Touch Screen Menus
Page 89

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vwa-4700Vwa-4900Vwa-4500

Table of Contents