Dukane VWA-4300 User Manual page 128

Linear Vibration Welder 4000 Series, Model VWA User's Manual
Status Indicator
On (Steady)
RUN (GREEN) Flashing (During Operation)
Off
Flashing (At power up)
Flashing (During Operation)
FLT (RED)
On (Steady)
Off
On (Steady)
BATT (RED)
Off
Flashing
FORCE (AMBER)
On (Steady)
Off
Solid green
ENET Channel 1 Flashing green
(GREEN or RED)
Flashing red
On (Steady)
DF1 Modbus RTU
Master/ASCII mode
Off
DF1 Modbus RTU
Master/ASCII mode
RS-232 Channel 0
(GREEN)
On (Steady)
DH-485 mode
Flashing
DH-485 mode
Off
DH-485 mode
Allen Bradley PLC Status Indicators and Indication
Table 10- I
Page 122
Continued from Previous Page
Status
The procesor is in the Run mode.
The processor is transferring a program from RAM to the memory module.
The processor is in a mode other than Run.
The processor has not been configured.
The processor detects a major error either in the processor, chassis, or
memory.
A fatal error is present (no communication).
There are no errors.
The battery voltage has fallen below a threshold level, or battery is missing
or not connected.
The battery is functional.
One or more input or output addresses have been forced to an On or Off
state but the forces have not been enabled.
The forces have been enabled.
No forces are present or enabled.
The Ethernet port is functioning properly and is connected to an active
Ethernet network.
The Eternet port is functinoing properly, connected to an active Ethernet net-
work and is transmitting packets.
A hardware or software fault has occurred and is being reported via a
code. Contact Allen Bradley for assistance.
The SLC 5/05 processor is transmitting on the network.
The SLC 5/05 processor is not transmitting on the network.
The Channel 0 Communications Active bit (S:33/4) is set in the System Status
file and the processor is actively communicating on the network.
The processor is trying to establish communication, but there are no other
active nodes on teh DH-485 network.
A fatal error is present (no communication).
Indication
Dukane Manual Part No. 403-592-00