Selecting A Setup File; Load An Existing File; Programming A New File; Set Limits - Dukane VWA-4300 User Manual

Linear Vibration Welder 4000 Series, Model VWA User's Manual

Selecting a Setup File

Load an Existing File

Instructions for loading an existing setup file are given
in Section 6 – on Page 68.
These steps review that information.
1. Go to Setup mode.
2. Press the Load Setup button, shown in Figure 8-2.

Setup Control

Figure 8 - 2
3. A file selection window will appear. See Figure 8-3.
4. Select a setup file, and press the Load button to ac-
cept the file.

Programming a New File

Detailed instructions for setting up a new file are given
in Section 6 – on Page 68.

Set Limits

Instructions for setting limits are given in Refer to
Figure 6 - 26, Page 65.
Load Setup
Figure 8 - 3
Page 108
Dukane Manual Part No. 403-592-00