Making Selections - Dukane VWA-4300 User Manual

Linear Vibration Welder 4000 Series, Model VWA User's Manual

Making Selections

From a I/O Setup Pop-Up Menu
In the example shown in Figure 6-5 to the right - a detail of
the Utilities, Setup menu - the Sensor 1 function can be set
to BYPASS, PART IN PLACE, or EXTEND. BYPASS
is highlighted indicating Sensor 1 input is ignored, and
indicators will be gray on the Operate screen.
To make this selection:
1. Touch the Sensor 1 box. The box activates, and the
pop-up menu appears as shown.
2. From the pop-up menu, touch BYPASS. The selection
is highlighted.
3. Confirm the selection by touching OK . The confirmed
selection will then appear in the Sensor 1 box.
Page 44
Pop-Up Menu Detail
Figure 6 -5
Dukane Manual Part No. 403-592-00