Linear Vibration Welder 4000 Series, Model VWA User's Manual
Logging In and Out
Create User Profile - Set Password
After the machine has been powered up, complete the
login procedure as follows:
1. Log in as Administrator.
2. Setup Mode must be active as shown in the figure
below. (If in Run Mode, toggle the Run Mode
button and it changes to Setup Mode.) Touch the
Utilities button in the header. Then touch Security
button, and finally the Users button. See Figure 6-14
below.
3. Enter a user name and password.
4. Select a group to which the new user belongs.
5. Press Add User.
6. Logout as Administrator.
7. Login using new user name and the default password.
Figure 6 -14 Log In - 1
Page 50
Delete User – Only an administrator can delete a
user. From the drop-down list, select a user's name
for deletion. Then touch the Delete User button to
remove the name from the
Dukane Manual Part No. 403-592-00
list.