Dukane VWA-4300 User Manual page 54

Linear Vibration Welder 4000 Series, Model VWA User's Manual
Sliding Door
Touch the Sliding Door button, and its pop-up window
appears as shown in Figure 6-11. Touch either Close
Door or Open Door continuously until the door comes
to the desired position. Indicator lights turn GREEN when
door is moving. Press Quit when done.
Machine Reset
The Machine Reset button (and function) is only available
in Setup Mode.
Resetting the machine brings the welder to a starting point.
1. Press this button to put the machine into Home position.
2. A pop-up window appears with instructions. See Figure
6-12 to the right.
3. Completed items are marked with a green check mark.
4. With all items completed, and with the machine in the
Home position, press the Quit button.
Page 48
Figure 6 -11 Sliding Door Pop-Up Window
Figure 6 -12 Machine Reset Pop-up Window
Dukane Manual Part No. 403-592-00