Dukane VWA-4300 User Manual page 76

Linear Vibration Welder 4000 Series, Model VWA User's Manual
Vacuum Start of Weld
before the start of weld and it is turned off during the
Hold time.
Utilities > I/O Setup
the I/O Setup push button on the sub-menu toolbar
directly below the Header. A sample screen is shown on
the previous page in Figure 6-30. The I/O Setup screen
provides multiple choices for device settings.
Valves - Options for Trigger and Stop settings and for
Extend and Retract settings.
Sensors - Options for sensors to be bypassed or to
indicate whether a part is in place and extended.
- Options for Vacuum control.
Vacuum
- Navigation push buttons to manipulate setup
Files
files.
Load I/O Setup
Reload I/O Setup
Save I/O Setup
Page 70
Continued from Previous Page
-
The vacuum is turned on
- Access this screen by pushing
Touch the Load I/O Setup
button to load a setup from
the file of saved setups.
Touch the Reload I/O
Setup button to reload data
to the current setup.
Touch the Save Setup
I/O
button to save the current
setup.
NOTE
Refer to the Help window for explanations
of I/O Setup functions. The Help screen
is accessed from any screen via the Help
pushbutton on the header. OR......
The Context Help screen is accessed from
any screen via the Context Help pushbut-
ton on the left-side toolbar. This function
will provide specific help for the function
being displayed.
Save I/O Setup As. . .
Rename I/O Setup
Erase I/O Setup
Dukane Manual Part No. 403-592-00
Touch the Save Setup
I/O
As button to save the data
with the name given as New
Job.
Touch the Rename
I/O
Setup button to rename
the setup that is currently
selected.
Touch the Erase I/O Setup
button to erase an I/O setup.
Continued