Dukane VWA-4300 User Manual page 74

Linear Vibration Welder 4000 Series, Model VWA User's Manual
Setup Control
To make changes within the Setup screen, the system must
be in Setup mode. See the NOTE to the right.
Press the Setup push button on the header to access the
Setup screen. While on the Setup screen, the operator can
control the current setup in a variety of ways. The figure
below shows the six buttons at the bottom of the screen, and
brief functional descriptions for each button are provided.
Figure 6-29 Setup Control
Save Setup
Save Setup As. . .
Load Setup
Reload Setup
Erase Setup
Rename Setup
Page 68
Touch the Save Setup but-
ton to save the current setup.
Touch the Save Setup As
button to save the data with
the name given as New Job.
Touch the Load Setup
button to load the file that is
selected.
Touch the Reload Setup
button to reload data to the
current setup.
Touch the Erase Setup
button to erase a setup that is
currently selected.
Touch the Rename Setup
button to rename the setup
that is currently selected.
NOTE
Initiate Setup mode by pressing the Run/
Setup push button located on the toolbar.
The system is in Setup mode when the Run/
Setup push button reads Run Mode. A yellow
dialog box is also visible in the upper left-
hand corner of the header.
In Run Mode all boxes are disabled.
Create a Setup
1. Select and enter process parameter(s).
2. Enter a setup title.
3. Press the Save Setup As button.
4. Enter file name and save.
5. The (setup file) field will update with the path of the
save location and name of the file.
Edit a Setup
1. Select the desired setup.
2. Press Load Setup.
3. Edit the process parameters.
4. Press Save Setup to update the setup.
5. To verify that the change was made to the updated
setup, press Load Setup.
6. Check the parameters that were changed.
NOTE
Refer to the Help window for explana-
tions of setup functions. The Help screen
is accessed from any screen via the Help
pushbutton on the header. OR......
The Context Help screen is accessed from
any screen via the Context Help pushbut-
ton on the left-side toolbar. This function
will provide specific help for the function
being displayed.
Dukane Manual Part No. 403-592-00