Linear Vibration Welder 4000 Series, Model VWA User's Manual
Setup
Setup
is used to program most elements of the weld cycle.
Setup
Touch the
button on the header to activate the Setup
screen.
A sample screen and definitions of terms are shown below.
Figure 6-22 Setup Mode - Setup Screen
Setup Title
– The name of the setup can be up to 30
characters
long.
Trigger By
– Choose from two trigger methods:
Trigger by Zero Motion – Vibration is started when
the lift table stops moving.
Page 60
Dukane Manual Part No. 403-592-00
Continued