Removal Procedures - Lexmark C935 Service Manual

5057-XXX

Removal procedures

Before starting service work
Remove the power cord from the electrical outlet before you connect or disconnect any cable
or electronic board or assembly.
While performing service around the fuser assembly, ensure the fuser area has cooled down.
Note: Some removal procedures require removing cable ties. You must replace cable ties during reassembly to
avoid pinching wires, obstructing the paper path, or restricting mechanical movement.
Note: A wide variety of screws are used; make note of their positions during service.
4-2
Printer Service Manual
CAUTION:
CAUTION:
Previous
Next
Go Back