Media Transport Path - Lexmark C935 Service Manual

5057-XXX

Media transport path

The following is a cross section of the printer and the tandem tray module, showing the main components
directly associated with the media path and transport.
Standard media exit
roll assembly
Fuser exit
roll assembly
Duplex media
transport roll
assembly
MPF
MPF pick roll
Media transport roll assembly
Tray module transport
roll assembly
Pick roll
Feed roll
Separation roll
Tray module transport
roll assembly
Tray 4 transport roll assembly
Functions of main components
When the 3TM is installed under the printer, additional trays are available.
Media tray assembly
It is necessary to adjust the rear and the end guide in the media tray assembly to match the media size.
Rear media guide
The rear media guide can be adjusted to different media sizes by moving it to the front or rear. The guide comes
into contact with the rear edge of the media and holds it in position.
1-44
Printer Service Manual
Bridge unit assembly
(included with finisher)
Bridge unit bin exit
roll assembly
Fuser
2nd transfer roll assembly
Registration roll assembly
Tray 1
Tray 2
Tray 3
Tray 4
Tray 2
Tray 2
Tray 4
Tray 3
Upper media
transport roll assembly
Finisher media entrance
roll assembly
Upper media exit
roll assembly
Booklet media
transport roll assembly
Booklet maker unit
(optional)
Finisher
(optional)
3TM (optional)
1TM (optional)
TTM
Buffer roll assembly
Media eject
roll assembly
Lower media exit
roll assembly
Booklet media
entrance roll assembly
Booklet media
exit roll assembly
Booklet folding
roll assembly
Previous
Next
Go Back