Event Log - Lexmark C935 Service Manual

If the printer's firmware detects that either of the printer's Configuration IDs has not been defined or is invalid,
then the following occurs:
1. The firmware automatically uses the Configuration IDs defined for the printer's standard model.
2. The Configuration ID setting is the only item that appears when you open the Diagnostics menu.
3. When the printer is not in Diagnostics mode, Check Config ID appears on the LCD.
Note: Each of the above conditions will remain until a valid value is entered for Configuration ID 1 and
Configuration ID 2.
The Configuration ID setting allows you to set both Configuration IDs simultaneously. To set one or both
Configuration IDs:
1. From the PRINTER SETUP menu, select the icon to the right of the Configuration ID menu item. The
screen displays the value of both Configuration IDs. By default, the cursor appears on the Configuration
ID 1 line.
2. To change the value of Configuration ID 1, press the Backspace key to erase any of the existing
characters. Then enter the correct ID using the number and letter keys that appear on the screen.
3. To edit the value of Configuration ID 2, select a section of the display screen that appears inside of the text
box containing the current value of Configuration ID 2. The cursor appears in the text box containing the
current value of Configuration ID 2.
4. To change the value of Configuration ID 2, press the Backspace key to erase any of the existing
characters. Then enter the correct ID using the number and letter keys that appear on the screen.
Note: To exit the Configuration ID screen and return to the PRINTER SETUP menu, press Back.
Note: Although it is recommended that all unused and reserved bits be set to zero, the code will not validate or
enforce this condition.
5. To save the values of both Configuration IDs, select Submit. The printer validates both IDs. If either ID is
invalid, the printer posts Invalid ID, discards any changes, and displays the original Configuration IDs. If
both IDs are valid, the printer automatically returns to the PRINTER SETUP menu.

EVENT LOG

The exact number of events recorded in the Event Log will vary since each event requires a different amount of
storage space. When the Event Log requires more space to record an event, it overwrites the oldest currently
logged event(s) and inserts the new event into the first log position. Consecutive log entries may be identical if
the same event occurred twice in a row.
The Event Log records the following types of events:
•
All 9xx Service Errors
•
2xx Paper Jams
•
Maintenance Count Resets
•
NV Resets and various types of JFFS@ partition formats
Select EVENT LOG from the Diagnostics Menu, and the following options are displayed:
Display Log
Print Log
Clear Log
Display the Event Log
Note: The displayed version of the Event Log shows only a subset of the information contained in the
Diagnostics version of the printed Event Log. For the most comprehensive information about each logged event,
print the Event Log. See
Select Display Log
"Print the Event Log" on page 3-18.
5057-XXX
Previous
Go Back
3-17
Diagnostic aids
Next