Lexmark C935 Service Manual page 347

Warning: When removing the CMY toner add assemblies, the toner cartridges should be left installed in order
to reduce toner spillage.
7. Remove the three CMY toner add assemblies. See
Warning: When removing the K toner add assembly, the toner cartridge should be left installed in order to
reduce toner spillage.
8. Remove the K toner add assembly. See
9. Remove the harnesses from the clamps on the developer interlock plate assembly (A).
Warning: Use extreme caution when disconnecting the next seven connectors from the upper harness strip, or
damage will occur.
10. Disconnect the seven connectors from the upper harness strip.
11. Remove the four developer harnesses from the four clamps on the developer interlock plate assembly (A).
12. Remove the six screws securing the developer interlock plate assembly (A) to the machine.
13. Remove the purple harness from the large black plastic clamp on the developer interlock plate assembly (A)
"CMY toner add assembly removal" on page
"K toner add assembly removal" on page
5057-XXX
4-46.
4-48.
4-49
Repair information
Previous
Next
Go Back