Sensor (2Nd Transfer Roll Retract Hp) Late Error - Lexmark C935 Service Manual

5057-XXX
Step
6 Check the transfer belt steering motor assembly for proper
operation.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch Printer Motor tests
4. Touch Transfer belt steering motor.
Does the above component operate properly?
7 Check the transfer belt steering motor for proper
connection.
Is the above component properly connected.

904.03 Sensor (2nd transfer roll retract HP) late error

Step
1 Perform a POR.
Does the error occur when the power is turned off/on?
2 Check to ensure that the transfer belt lift mechanism is
functioning properly. See
adjustment" on page 4-228
Does the error remain?
3 Check the sensor (2nd transfer roll HP) for proper
operation.
1. Enter the Diagnostics Menu.
2. Touch Base Sensor Tests.
3. Touch Media Path.
4. Touch 2nd transfer roll retract HP.
Does the display on the operator panel, change every time
the sensing area of the above sensor is interrupted or
blocked?
4
Check the sensor (2nd transfer roll HP) for proper
connection.
Is the above component properly connected?
2-86
Printer Service Manual
Check
Caution: When performing motor tests,
ensure that all cover and door interlock
switches are overridden.
Check
"Transfer belt lift mechanism
.
Yes
Go to step 5. Go to step 4.
Replace the Replace the
transfer belt connection.
steering motor.
If the problem
Go to "Transfer persists, contact
the next level of
belt steering
motor removal" support.
on page 4-76.
Yes
Go to step 2. Perform several
print tests.
If the problem
remains, go to
step 2.
Go to the next The problem is
step. resolved.
Go to step 4. Go to step 3.
Replace the Replace the
sensor (2nd connection.
transfer roll retract
HP) .
Go to "Sensor
(2nd transfer roll
retract HP)
removal" on
page 4-34.
Previous
No
Next
Go Back
No