X 500-Sheet Drawer (1Tm)—Media Feed Lift Motor Removal - Lexmark C935 Service Manual

5057-XXX
1X 500-sheet drawer (1TM)—media feed lift motor removal
1. Remove the media feed unit assembly. See
(tray 2)" on page
2. Disconnect the harness from the media feed lift motor (A).
3. Remove the two screws securing the media feed lift motor to the media feed unit assembly (B).
4. Remove the media feed lift motor (B).
1X 500-sheet drawer (1TM)—one-way clutch / gear assembly removal
1. Remove the media feed unit assembly. See
(tray 2)" on page
2. Remove the harness from the bracket (A).
3. Remove the three screws securing the bracket (A) to the media feed unit assembly.
4. Remove the bracket (A).
Note: The gears may become detached from the bracket (A).
5. Remove the tray lift one-way clutch (B).
4-196
Printer Service Manual
"1X 500-sheet drawer (1TM)—media feed unit assembly removal
4-193.
A
Connector
"1X 500-sheet drawer (1TM)—media feed unit assembly removal
4-193.
Harness
Clamp
A
Rear
B
Rear
Washer
B
Previous
Next
Go Back