Lexmark C935 Service Manual page 113

Error code or
Error contents
message
992.00 Sensor (de-curler clutch HP)
late error
Service finisher
error
992.01 Sensor (de-curler clutch HP)
lag error
Service finisher
error
Close cover F Bridge unit cover is open.
Close door A Printer left door open.
Close door B Duplex left door assembly
open.
Close door C Printer left lower door
assembly open
Close door D 1TM, 3TM or TTM left door
assembly open
Close door E Printer front door assembly
open
Close door G Finisher front door open.
Close door J Transfer belt access door
open.
Close Eject cover open.
surface H
Empty hole Punch waste box full.
punch box
Insert hole Punch waste box missing.
punch box
Load staples Staple cartridge empty.
Load tray x with No media in the selected
<media> media tray.
Description/Action
The sensing area of the sensor (de-curler cam HP)
is not interrupted within the specified time after the
de-curler roll assembly (nip) starts moving to the
home position.
Refer to the Finisher Service Manual.
The sensing area of the sensor (de-curler cam HP)
remains interrupted within the specified time after
the de-curler roll assembly (nip) starts moving from
the home position.
Refer to the Finisher Service Manual.
The bridge unit assembly cover is open.
Refer to the Finisher Service Manual.
The printer left door assembly is open, or the printer
left door closed actuator is damaged.
Go to "Printer left door open" on page
The Duplex left door assembly is open.
Go to "Duplex left door assembly open" on
page 2-128.
The printer lower left door assembly is open.
Go to "Printer left lower door assembly open" on
page 2-136.
The 1TM, 3TM or TTM tray left door assembly is
open.
Go to "1TM, 3TM or TTM left door assembly
open" on page 2-127.
Printer front door assembly is open.
Go to "Printer front door assembly open" on
page 2-133.
The finisher front door is open.
Refer to the Finisher Service Manual.
The transfer belt access door is open.
Go to "Transfer belt access door open" on
page 2-135.
The finisher eject cover is open.
Refer to the Finisher Service Manual.
The punch waste box is full.
Refer to the Finisher Service Manual.
No punch waste box.
Refer to the Finisher Service Manual.
Staple cartridge empty.
Refer to the Finisher Service Manual.
Media is not loaded in the tray.
Go to "No media in the selected media tray" on
page 2-131.
Diagnostic information
5057-XXX
Previous
Next
Go Back
2-134.
2-21